Skip to main content

Logitech MX Master 3 for Mac Mouse Feet (That Cover Screws) Removal

Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Step Type:

Drag to rearrange

If the adhesive separated from the foot:

Slide the flat end of a spudger under an edge of the adhesive. If the adhesive seems stuck, you may need to heat the adhesive further.

Use a pair of tweezers or a spudger to remove any large chunks of leftover adhesive.

For installing new mouse feet or reusing your old ones:

Thoroughly clean the bottom of the mouse with isopropyl alcohol and a lint-free of microfiber cloth. Allow the surface to dry completely.

Peel your new mouse feet away from their adhesive liners and press them firmly into place.

Your contributions are licensed under the open source Creative Commons license.