Skip to main content
Help
Editing Step 15 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Very slowly lift the screen assembly away from the Surface case. If you encounter any resistance, stop and check that all the adhesive is separated.

Do not remove the screen yet. It is still connected to the motherboard by two cables.

Use an opening pick to cut through any remaining adhesive.

The flash lens may fall out of the Surface case. Keep track of the lens and return it to its cutout in the case during reassembly.

Your contributions are licensed under the open source Creative Commons license.