Skip to main content
Editing Step 11 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Reheat your iOpener and apply it to the left edge of the Surface's screen for two minutes.

The adhesive is thickest along this edge, and you may need to reheat and reapply the iOpener several times to get the tablet warm enough. Follow the iOpener instructions to avoid overheating.

A hair dryer or heat gun may also be used for more heat, but be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage.

Your contributions are licensed under the open source Creative Commons license.