Skip to main content
Editing Step 8 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

The antenna cable is anchored to the speaker with a small metal bracket. The bracket is permanently crimped to the antenna and adhered to the speaker enclosure. The adhesive must be severed in order to extract the antenna.

Carefully insert an opening pick between the speaker enclosure and the bracket.

Slide the pick towards the charging port to cut the adhesive.

Push the bracket away from the speaker to clear it of the tape under it.

Your contributions are licensed under the open source Creative Commons license.