Skip to main content
Help
Editing Step 8 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Use the flat end of a spudger to disconnect the LCD cable by lifting straight up on the press connector.

To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Your contributions are licensed under the open source Creative Commons license.