Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Don't attempt to fully remove the LCD during this step, as it's still connected by several cables at the home button end.

Only lift the LCD from the front-facing camera end.

Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

Lay the LCD down onto a clean, soft, lint-free surface to allow access to the display cables.

Your contributions are licensed under the open source Creative Commons license.