Skip to main content
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Flip the Apple TV over so that the bottom of the unit is facing up.

You need to remove the rubber base to get access to the screws.

Starting at one side of the device, use a hairdryer or a heat gun to soften the adhesive holding the rubber base in place.

The rubber base will be hot after heating, take extreme caution while proceeding to avoid personal injury.

While the adhesive is still warm, peel the bottom of the rubber base upwards to detach it from the metal plate.

Repeat the procedure described above until the rubber base has been completely removed.

Your contributions are licensed under the open source Creative Commons license.