Skip to main content
Help

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Prepare an iOpener (or use a hair dryer or heat gun) and heat the face of the watch to loosen the display adhesive.

Leave the iOpener on the watch for at least two minutes to fully heat the screen and soften the adhesive holding it to the case.

You may need to reheat the iOpener and repeat this procedure several times until the display adhesive softens.

Your contributions are licensed under the open source Creative Commons license.