Skip to main content
Help
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Use a Phillips #1 screwdriver to remove the twelve 6-mm screws that borders the bottom of the laptop.

Start with the three screws on the top right corner and work clockwise. This will minimize the chances missing some of the screws.

Use a Phillips #1 screwdriver to remove a 6-mm screw that is located in the lower middle, as shown.

Use a Phillips #1 screwdriver to remove the three 3-mm screws located in the battery bay.

Use a Phillips #1 screwdriver to remove the one 4-mm screw located near the RAM.

Your contributions are licensed under the open source Creative Commons license.