Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Grip the base of the interconnect cable connector with your fingers.

Depress each side of the connector to unlock the cable locking tabs.

With the locking tabs depressed, grip the edges of the interconnect cable and pull it straight out of the connector to disconnect it.

With the locking tabs depressed correctly, the interconnect cable will slide out with very little force.

During reassembly, the interconnect cable should "snap" into place when fully inserted.

Your contributions are licensed under the open source Creative Commons license.