Remove the screen.

To install a new screen:

Check if your replacement screen has speaker mesh and top edge adhesive pre-installed.

If it does, you won't need the top edge adhesive.

If it doesn't, remove the larger clear liner from the top edge adhesive and apply it to the screen (not the frame). Make sure the larger cutout lines up with the speaker mesh.

Follow this guide to apply the custom-cut adhesive.

Use the third photo as a reference to position your adhesives.

During the boot-up process after reassembly, the screen will go through a calibration sequence. Don't touch the screen during this process, as it could result in improper touch calibration and create touch issues.