Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 13 guides that include this step.

Step Type:

Drag to rearrange

This step shows how to insert your pick without damaging the OLED panel. Do this before slicing the adhesive.

With the pick 1 mm into the gap, pivot the pick upwards to a steep angle.

At a steep angle, carefully push the pick into the gap about 1/4 inch (6 mm). The pick should slide in below the OLED panel.

Stop if you feel the point of the pick hitting a ridge. The pick may be pressing against the edge of the OLED panel. Angle the pick and try again.

Your contributions are licensed under the open source Creative Commons license.