Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Follow the next steps if you are replacing your hard drive with an SSD kit.

If your SSD enclosure looks like the first image, follow this guide instead.

Line up the SSD connectors with the metal enclosure's sockets.

Press the drive against the enclosure sockets until the SSD is firmly seated.

The SSD connects with the enclosure in only one direction. If the connectors don't line up, rotate the SSD and try again.

Your contributions are licensed under the open source Creative Commons license.