Skip to main content
Help
Editing Step 18 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

Begin to lift the top of the display up from the frame.

Only lift the display a few inches—it is still attached to the iMac by data and power cables.

Your contributions are licensed under the open source Creative Commons license.