Skip to main content
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Step Type:

Drag to rearrange

Carefully pull apart the two parts of the exterior frame.

Use the spudger to pry apart the two frame components.

Once disconnected, the two parts of the frame can be easily separated by using your fingers.

The rear frame should be removed first.

There should be an O-ring on the front face of the camera. Ensure to keep the O-ring with the front part of the frame.

The orientation for the pictures is changed in order to properly show which piece is being removed.

Your contributions are licensed under the open source Creative Commons license.