Skip to main content
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Grip the top control board with the tweezers and gently pull up to unseat it from the placement pins it sits on.

Be aware that the optical viewfinder is connected to the top control board and should come out with it.

If need be, use the spudger to gently pry out the optical viewfinder.

Note that the orientation of the camera has been changed in this step in order to properly show the top face of the camera.

Your contributions are licensed under the open source Creative Commons license.