Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Using the spudger, gently push up the board from the pins underneath it.

Follow the board up and around the camera, gently unseating the board and cables.

The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear accessory board.

For best results, grip the tweezers as close to the plug as possible.

Your contributions are licensed under the open source Creative Commons license.