Skip to main content
Help
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Gently lift the screen and pull it apart from the camera, taking care to unslot the screen brackets from the tabs on the bottom and left side of the camera.

Do not pull too hard on the screen as there is still another delicate cable running from the screen to the rear board of the camera.

Gently pull the wide ribbon (shown in an earlier step) cable from the front of the camera to the back using tweezers.

Your contributions are licensed under the open source Creative Commons license.