Skip to main content
Help

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 14 guides that include this step.

Step Type:

Drag to rearrange

Apply a suction cup to the back of the phone, as close to the center of the bottom edge as possible.

If the back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken cover.

Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

Insert the point of an opening pick into the gap.

Due to tight tolerances, this may take multiple attempts of reheating with the iOpener and separating with the suction cup before you get it right.

If you are having trouble creating a gap, apply more heat to the edge and try again.

Do not apply excessive force with the pick, or you risk cracking the back cover glass.

Your contributions are licensed under the open source Creative Commons license.