Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Use tweezers to lift the adhesive pull tab at the top of the left speaker enough that you can grab it with your fingers.

Grab the adhesive strip pull tab and slowly and carefully pull the adhesive strip out from under the speaker.

Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.

If the adhesive strip breaks, or if the first adhesive strip broke, use a heated iOpener or heat gun to help remove the adhesive:

Apply heat to the speaker to soften the adhesive underneath.

Carefully slide a spudger or opening pick underneath the speaker to separate the adhesive.

Your contributions are licensed under the open source Creative Commons license.