Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 21 guides that include this step.

Step Type:

Drag to rearrange

Apply heat to the left edge of the iPad for about two minutes, or until it's slightly too hot to touch comfortably.

If necessary, re-heat your iOpener for a few seconds or until it's a bit too hot to touch. Be careful not to overheat the iOpener, or it may burst.

Insert a second opening pick at the bottom left corner of the iPad.

Slide the second opening pick along the left side of the display to separate the adhesive underneath.

Leave the opening pick inserted near the top left corner of the iPad to prevent the adhesive from re-sealing.

Your contributions are licensed under the open source Creative Commons license.