Help

Editing Step 5 — Add a title

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Open the MacBook Pro approximately 110 degrees, and place it sideways on the table, as shown.

While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket.

Be sure to hold the display and upper case together with your left hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.

Remove the last remaining T8 Torx screw securing the display to the upper case.

Your contributions are licensed under the open source Creative Commons license.