Skip to main content
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 11 guides that include this step.

Step Type:

Drag to rearrange

Insert the flat end of a spudger perpendicular to the face of the display between the plastic strip attached to the rear bezel and the front bezel.

Do not insert your spudger between the plastic strip and the rear bezel.

With the spudger still inserted, rotate it away from the display to separate the front and rear bezels.

Work along the right edge of the display until the rear bezel is evenly separated from the front bezel.

Your contributions are licensed under the open source Creative Commons license.