Editing Step 12 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Remove the following screws securing the logic board to the upper case:

Eight 3.3 mm T5 Torx screws

One Phillips #00 screw

Two 3.1 mm T5 Torx screws

Remove two more screws, from the MagSafe DC-In board in the upper right corner (second image).

Two 3.4 mm T5 Torx screws

Your contributions are licensed under the open source Creative Commons license.