Editing Step 9 —

Step Type:

Drag to rearrange

Now that the top edge is free, slightly lift the LCD out of the front bezel for enough room to pry the steel strip along the lower edge of the LCD away from the front bezel.

Pry along the lower edge of the LCD until it is freed from the adhesive on the front bezel.

Avoid pulling the edge of the LCD unit from the screen. Be sure to insert the tool between the metal of the bezel and the metal of the LCD. If the adhesive is very strong, make a couple trips across the bottom edge to avoid applying too much pressure.

Your contributions are licensed under the open source Creative Commons license.