Strip all the wires out from both cables using a wire stripper. You'll need about three quarters of an inch of exposed copper wire.
If you don't have a wire stripper, you can strip the wires the same way as you exposed these wires. Gently cut the outer insulation, then pull off the insulation.
When stripping wires, do not cut or damage the copper wires. If you do damage the wire, cut off the damaged portion and try again.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.