Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Now the back cover is off and the battery is removed, so the hard drive is clearly visible.

There are four 4.2 mm screws securing the hard drive to the logic board.

Remove all four screws using a Phillips #00 screwdriver.

Don't lose any of the screws! If necessary, use a magnetized screw driver.

Your contributions are licensed under the open source Creative Commons license.