Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible.

If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

Lift the rear glass with the suction cup to create a gap between the glass and the frame.

Insert an opening pick into the gap.

If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

Your contributions are licensed under the open source Creative Commons license.