Skip to main content
Help
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Once all of the adhesive is broken and the logic board is free, gently lift it up from the top.

Again, be careful not to bend or stress the logic board—make certain that you have cleared all of the adhesive with the spudger.

Lift the logic board and Lightning cable assembly up and pull toward the top of the iPad to remove the Lightning connector from its housing.

Remove the assembly from the iPad.

Your contributions are licensed under the open source Creative Commons license.