Skip to main content
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Remove the seven black 3mm Phillips #00 screws next to the M2x3 label along the edge of the battery using the Phillips #00 screwdriver.

There are arrows next to the labels that will help you identify the screws.

HP placed Threadlocker Blue Sealant around the screws to keep them from loosening, so be careful to not strip the screws. To avoid this, apply constant downward pressure on the screws during this step.

In this step, a JIS #00 screwdriver could be more useful than a regular Phillips #00 screwdriver.

Your contributions are licensed under the open source Creative Commons license.