Skip to main content
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

In the following steps, you'll be cutting through the adhesive securing the back cover.

The adhesive is laid out as seen in the first image, which shows the inside of the cover after it has been removed.

As seen from outside the phone, you'll be slicing through the adhesive in the areas shown:

Thick portions of adhesive

Thin areas of adhesive

Avoid prying or slicing in this area, to protect the fingerprint sensor flex cable.

Your contributions are licensed under the open source Creative Commons license.