Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 27 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.

There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.

Lifting from the left side, remove the logic board.

Your contributions are licensed under the open source Creative Commons license.