Skip to main content
Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera.

Pry upwards to disconnect the connector from its socket.

When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.

Gently push the battery's flex cable away from the motherboard socket to prevent accidental contact.

Your contributions are licensed under the open source Creative Commons license.