Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Once you have sliced around the phone, twist an opening pick in one of the edges to help separate the back cover from the frame.

Lift the back cover slowly. Use opening picks to slice any remaining adhesive.

Remove the back cover.

During reassembly, this is a good point to power on your phone and test all functions before you seal the back cover in place. Be sure to power your phone back down completely before you continue working.

Follow this guide to reinstall the back cover, transfer and install the camera bezel, and replace the adhesive.

Your contributions are licensed under the open source Creative Commons license.