Skip to main content

Motorola Moto E4 Plus Motherboard Assembly

Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Use the edge of a spudger to pry up the flap of the ZIF connector located below the SIM slot on the left side of the motherboard.

Use a pair of tweezers to pull the power and volume button flex cable out of the ZIF connector.

To reattach ZIF connectors like this one, carefully insert the flex cable into the ZIF connector up to the marked line on the cable, and then close the locking flap.

Your contributions are licensed under the open source Creative Commons license.