Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Wedge a plastic opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.

Slide the plastic opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.

The front panel should now be free from the metal frame. However, it is still connected to the frame, so don't remove it completely.

Your contributions are licensed under the open source Creative Commons license.