Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 1 —

Step Type:

Drag to rearrange

Before installing new adhesive, thoroughly clean the display assembly and the frame of all residue.

Use tweezers to pull up sections of tape residue.

Use an opening tool or a spudger to scrape residue off. You can use high concentration (over 90%) isopropyl alcohol to soften the adhesive.

Remove the residue by wiping in one direction to prevent smearing.

Do not scrape with a metal tool, or you will scratch the display assembly's surface.

Your contributions are licensed under the open source Creative Commons license.