Skip to main content
Help
Editing Step 29 —

Step Type:

Drag to rearrange

The goal is to lift the battery contacts high enough such that they clear the screw post underneath the logic board.

Slowly lever the extended Battery Blocker upwards, pushing the battery contacts and the logic board up.

The logic board is held to the rear case with strong adhesive. Try to lift just enough to loosen the adhesive surrounding the connector.

Do not lift the logic board up to the point where the top and bottom edge of the logic board separates from the case.

Once the extended Battery Blocker has lifted the battery contacts high enough to clear the screw post, pull the battery out of its position.

Remove the battery and the Battery Blocker.

Your contributions are licensed under the open source Creative Commons license.