Skip to main content
Editing Step 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Disconnect the battery by inserting a Battery Blocker underneath the logic board to isolate it from the battery's contacts.

Insert the Battery Blocker at a slight angle first with one side under the logic board, then slide the rest in over the battery contacts.

This may require carefully applied force as the logic board has adhesive holding it onto the case.

Unless specified otherwise, leave the Battery Blocker in place until you have completed your repairs.

Your contributions are licensed under the open source Creative Commons license.