Skip to main content
Help
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Lift the logic board EMI shield, starting at the edge nearest the top of the iPad.

Slowly peel the EMI shield up from the logic board.

This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.

Remove the logic board EMI shield.

Your contributions are licensed under the open source Creative Commons license.