Skip to main content
Help
Editing Step 16 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

Step Type:

Drag to rearrange

Remove the display assembly.

During reassembly, before installing a display, remove any remaining adhesive from the iPad, and clean the glued areas with high concentration isopropyl alcohol (90% or greater) and a lint-free cloth. This helps prep the iPad for fresh adhesive and ensures that it will bond properly.

If you plan to reinstall your existing display, remove any remaining adhesive from the back and clean the adhered areas with isopropyl alcohol.

Test your iPad's functions and install pre-cut adhesive strips to the back of the display using our display adhesive application guide before sealing it up.

Your contributions are licensed under the open source Creative Commons license.