Skip to main content
Help
Editing Step 14 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

Step Type:

Drag to rearrange

Use a spudger to disconnect the two visible display flex connectors by gently prying them straight up from their sockets.

To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Your contributions are licensed under the open source Creative Commons license.