Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

The brackets are lightly adhered in place.

Gently lift to unstick and remove each bracket, being careful not to bend it.

If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the brackets is not recommended, as this may bend the spring contacts along the top.)

Your contributions are licensed under the open source Creative Commons license.