Skip to main content
Editing Step 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

When prying up the speaker, take care not to damage the speaker flex cable you just disconnected. If necessary, bend the cable toward the battery so the speaker has room to come out.

Insert a spudger under the top edge of the speaker, near the edge of the iPhone's case.

Gently pry up and lift the top edge of the speaker slightly.

When reinstalling the speaker, check the position of the flex cable and make sure it doesn't get trapped underneath the speaker.

Your contributions are licensed under the open source Creative Commons license.