Skip to main content
Editing Step 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Align the screen and press it down firmly onto the adhesive.

To improve bonding of the adhesive you can use an iOpener to warm up the display. Then apply some pressure for a few hours (placing it under one or two heavy books overnight might be a way).

Alternatively, you can use screen vice clamps around the perimeter of your device to set the new adhesive.

Your contributions are licensed under the open source Creative Commons license.