Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

Step Type:

Drag to rearrange

In the following steps, you'll be cutting through the adhesive securing the back cover.

The adhesive in the inside of the back cover is laid out as seen in the image.

You'll be slicing through the adhesive in the areas shown:

Thick portions of adhesive

Thin areas of adhesive

Avoid prying or slicing in this area, to protect the fingerprint sensor flex cable.

Your contributions are licensed under the open source Creative Commons license.