Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

The antenna cable connector and socket are fragile.

Use the point of a spudger or fine tweezers to gently pry the antenna cable connector straight up off its socket on the logic board.

To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it straight down until it snaps into place.

If you need more slack in the cable, you can temporarily pry it from the clips securing it to the antenna plate.

Your contributions are licensed under the open source Creative Commons license.