Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 25 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Continue rotating the board toward yourself until you have enough room to reach the SATA connector (shown in red).

Insert the blunt end of a metal spudger between the SATA connector and its socket. Twist the shaft of the metal spudger to separate the connector from its socket.

Disconnect the SATA cable from the logic board.

Lift the logic board out of the rear case by its edges, minding any cables that may get caught.

Your contributions are licensed under the open source Creative Commons license.