Get quick access to guides, parts, and answers for your devices
Looks like your cart is empty
Loosen and remove the two bolts located on the backside of the caliper with a 12mm socket.
Torque the two bolts to 33 ft-lbs when putting the caliper back on the mounting bracket.
Remove the caliper from the mounting bracket.
Do not allow the caliper to hang freely. This will causes stretching or internal blocking of the brake line.
TIP: Using hang wire to hang the caliper on the spring mount to keep it out of the way.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.