Skip to main content
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

The button ribbon cable is very fragile, especially near the down volume button. If you intend on reinstalling this piece later, be careful not to rip it.

Using a plastic opening tool or tweezers, pry the edge of the button strip away from the phone.

Once all of the buttons are free, the whole assembly should simply lift out.

Glue may be required to hold the new buttons to the phone.

Your contributions are licensed under the open source Creative Commons license.